Description
The 3500/62 Process Variable Monitor is a 6-channel monitor for processing machine critical parameters (pressures, flows, temperatures, levels, etc.) that merit continuous monitoring. The monitor accepts +4 to +20 mA current inputs or any proportional voltage inputs between -10 Vdc and +10 Vdc. It conditions these signals and compares the conditioned signals to user-programmable alarm setpoints. The user can program the 3500/62 using the 3500 Rack Configuration Software to perform either current or voltage measurements. The 3500/62 offers I/O modules for 3 signal input scenarios: +/-10 Volts DC, isolated 4-20mA, or 4-20 mA with Intrinsically Safe zener barriers. The Internal Barrier I/O provides external power input terminals to provide intrinsically safe power to the 4-20mA transducers The primary purposes of the 3500/62 monitor are to: 1. continuously compare monitored parameters against configured alarm setpoints to drive alarms for machinery protection, and 2. provide essential machine information for both operations and maintenance personnel. When used in a Triple Modular Redundant (TMR) configuration, you must install Process Variable Monitors adjacent to each other in groups of three. When used in this configuration, the monitor employs two types of voting to ensure accurate operation and to avoid loss of machinery protection due to single-point failures.
Ordering Considerations
General If the 3500/62 Module is added to an existing 3500 Monitoring System, the monitor requires the following (or later) firmware and software versions: l 3500/20 Module Firmware – 1.07 (Rev G) l 3500/01 Software – Version 2.20 l 3500/02 Software – Version 2.10 l 3500/03 Software – Version 1.20 If the Internal Barrier I/O is used the system must also meet these requirements: l 3500/62 Module Firmware- 1.06 (Rev C) l 3500/01 Software – Version 2.30 You cannot use External Termination Blocks with Internal Termination I/O modules. When ordering I/O Modules with External Terminations, you must order the External Termination Blocks and Cables separately. Internal Barrier I/O Module Important info Fuse Consult the 3500 Internal Barrier specification sheet (part number 141495-01) if you select the Internal Barrier Option. 250 mA, 250 V fast blow type.
Cables
3500/62 Transducer (XDCR) Signal to External Termination (ET) Block Cable 134544-AAAA-BB A: Cable Length 0005 5 feet (1.5 metres) 0007 7 feet (2.1 metres) 0010 10 feet (3 metres) 0025 25 feet (7.5 metres) 0050 50 feet (15 metres) 0100 100 feet (30.5 metres) B: Assembly Instructions 01 Not assembled 02 Assembled Spares Part Number Description 163179-03 3500/62 monitor 136590-01 Firmware IC 04425545 Grounding wrist strap (single use) 04400037 IC removal tool 136491-01 -10 Vdc to +10 Vdc I/O Module with internal terminations 136499-01 -10 Vdc to +10 Vdc I/O Module with external terminations 136294-01 Isolated +4 to +20 mA I/O Module with internal terminations 136483-01 Isolated +4 to +20 mA I/O Module with external terminations 137110-01 4 to 20 mA Barrier I/O Module with internal terminations 136973 3500/62 User Guide 01700059 Replacement fuse for barrier I/O
Our Advantage:
Best possible prices and delivery time
Long time experience in the field
Well trained staff
Own warehouse facilities
Best relationships with branch office of manufacture
Flexible and individual service for you
Cheap and safe forwarder for shipments (air)
Frequently Asked Questions:
Q: Does your goods are new and original?
A: Yes, they are new and original.
Q: How long warranty?
A: One-year warranty.
Q: Does any certificates can be provided?
A: Yes, it depends on what product you request, please check details with our sales.
Your message must be between 20-3,000 characters!
